Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 209/1523
6.3.4.4 sshc exec-timeout
This command sets the outbound ssh session timeout value in minute.
Changing the timeout value for active sessions does not become effective until the session
is reaccessed. Any keystroke will also activate the new timeout duration.
sshc exec-timeout <1-160>
no sshc exec-timeout
<1-160> - max connect time (Range: 1 -160).
no - This command sets the remote connection session timeout value, in minutes, to the default.
Default Setting
5
Command Mode
Global Config
6.3.4.5 show sshc
This command displays the current outbound sshc settings.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Outbound SSH Login Timeout (in minutes) Indicates the number of minutes an outbound ssh
session is allowed to remain inactive before being logged off. A value of 0, which is the default,
results in no timeout.
Maximum Number of Outbound SSH Sessions Indicates the number of simultaneous outbound
ssh connections allowed.
Allow New Outbound SSH Sessions Indicates whether outbound ssh sessions will be allowed.
To Next Page
Loading...
Need help?
General