Quanta Computer T5016-LB8D - Page 223

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 223/1523
6.3.6.2 show snmptrap source-interface
This command displays the configured global source interface used for the SNMP client. The IP address
of the selected interface is used as source IP for all communications with the server.
Syntax
show snmptrap source-interface
Default Setting
None
Command Mode
Privileged Exec
Display Message
SNMP trap Client Source Interface: The interface configured as the source interface for the SNMP
trap/inform client.
SNMP trap Client IPv4 Address: The IP address configured on the SNMP client source interface.