EasyManuals Logo

Quanta Computer T5016-LB8D User Manual

Default Icon
1523 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #240 background imageLoading...
Page #240 background image
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 240/1523
6.3.8.4 ip http server
This command enables access to the switch through the Web interface. When access is enabled, the
user can login to the switch from the Web interface. When access is disabled, the user cannot login to
the switch's Web server.
Disabling the Web interface takes effect immediately. All interfaces are affected.
Syntax
ip http server
no ip http server
no - This command disables access to the switch through the Web interface. When access is
disabled, the user cannot login to the switch's Web server.
Default Setting
Enabled
Command Mode
Global Config
6.3.8.5 ip http secure-port
This command is used to set the SSLT port where port can be 1-65535 and the default is port 443.
Syntax
ip http secure-port <portid>
no ip http secure-port
<portid> - SSLT Port value.
no - This command is used to reset the SSLT port to the default value.
Default Setting
443
Command Mode
Global Config

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Quanta Computer T5016-LB8D and is the answer not in the manual?

Quanta Computer T5016-LB8D Specifications

General IconGeneral
BrandQuanta Computer
ModelT5016-LB8D
CategorySwitch
LanguageEnglish