Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 265/1523
6.3.15.6 serviceport ipv6 address
Use this command to configure IPv6 global addressing (i.e. Default routers) information for the service
port.
serviceport ipv6 address <address>/<prefix-length> [eui64]
no serviceport ipv6 address [<address>/<prefix-length>]
no - This command remove all IPv6 prefixes on the service port interface.
<address>: IPv6 prefix in IPv6 global address format.
<prefix-length>: IPv6 prefix length value.
[eui64]: Formulate IPv6 address in eui64 address format.
Multiple IPv6 prefixes can be configured for the service port.
Default Setting
None
Command Mode
Global Config