Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 276/1523
This command displays summary information about all multiple spanning tree instances in the switch.
On execution, the following details are displayed.
show spanning-tree mst summary
Default Setting
None
Command Mode
Privileged Exec
Display Message
MST Instance ID List: List of multiple spanning trees IDs currently configured.
For each MSTID: The multiple spanning tree instance ID.
Associated FIDs: List of forwarding database identifiers associated with this instance.
Associated VLANs: List of VLAN IDs associated with this instance.
This command displays the detailed settings and parameters for a specific switch port within a
particular multiple spanning tree instance. The instance <mstid> is a number that corresponds to the
desired existing multiple spanning tree instance. The <slot/port> is the desired switch port.
show spanning-tree
ms
t port detailed <0-4
094> {<slot/port>
| port-channe
l <portchannel-
id>}
<0-4094> - multiple spanning tree instance ID.
<slot/port> - is the desired interface number.
<portchannel-id> - is the desired port-channel interface number. The range of port-channel ID is 1
to 64.
Default Setting
None
Command Mode
Privileged Exec
Display Message
MST Instance ID: The multiple spanning tree instance ID.
Port Identifier: The unique value to identify a port on that Bridge.
To Next Page
Loading...
Need help?
General