Quanta Computer T5016-LB8D - Page 300

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 300/1523
6.5.2.4 terminal monitor
This command enables logging for the terminal session.
Syntax
terminal monitor
no terminal monitor
no - This command disables logging for the terminal session.
Default Setting
None
Command Mode
Privileged Exec
6.5.2.5 logging host
This command enables logging to a host where up to eight hosts can be configured.
Syntax
logging host <hostaddress> [ <port>] [[<severitylevel> | <0-7>]]
<hostaddress> - IP address of the log server.
<port> - Port number.
[<severitylevel> | <0-7>] - The value is specified as either an integer from 0 to 7 or symbolically
through one of the following keywords: emergency (0), alert (1), critical (2), error (3), warning (4),
notice (5), informational (6), debug (7).
Default Setting
None
Command Mode
Globla Config