_____________________________________________________________________________
LB9 User’s Guide 327/1523
EAP Length Error Frames Received: The number of EAPOL frames that have been received by
this authenticator in which the frame type is not recognized.
6.8.1.11 show dot1x summary
This command is used to show a summary of the global dot1x configuration and summary information of
the dot1x configuration for a specified port or all ports.
<slot/port> - is the desired interface number.
no parameter - All interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface: The interface whose configuration is displayed.
Control Mode: The configured control mode for this port. Possible values are force-unauthorized /
force-authorized / auto / mac-based.
Operating Control Mode: The control mode under which this port is operating. Possible values are
authorized / unauthorized.
Reauthentication Enabled: Indicates whether re-authentication is enabled on this port.
Port Status: Indicates if the key is transmitted to the supplicant for the specified port.
To Next Page
Loading...
Need help?
General