_____________________________________________________________________________
LB9 User’s Guide 347/1523
Default Setting
None
Command Mode
Privileged Exec
Display Message
Host address - The IP address or hostname of the configured TACACS+ server.
Port: Shows the configured TACACS+ server port number.
Timeout: Shows the timeout in seconds for establishing a TCP connection.
Priority: Shows the preference order in which TACACS+ servers are contacted. If a server
connection fails, the next highest priority server is contacted.
6.8.1.33 show tacacs-server source-interface
This command is used to display the configured global source interface details used for a RADIUS client.
The IP address of the selected interface is used as source IP for all communications with the server.
Default Setting
None
Command Mode
Privileged Exec
Display Message
TACACS Client Source Interface: The interface to use as the source interface for TACACS client.
TACACS Client Source IPv4 Address: The IP address of the interface configured as the TACACS
client source interface.
To Next Page
Loading...
Need help?
General