Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 349/1523
6.8.1.35 show port-security
This command shows the port-security settings for the entire system.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Port Security Administration Mode: Port lock mode for the entire system.
This command shows the port-security settings for a particular interface or all interfaces.
show port-security { <slot/port> | all }
Default Setting
None
Command Mode
Privileged Exec
Display Message
Intf Interface Number.
Admin Mode Port Locking mode for the Interface.
Dynamic Limit Maximum dynamically allocated MAC Addresses.
Static Limit Maximum statically allocated MAC Addresses.
Violation Trap Mode Whether violation traps are enabled.
Violation Shutdown Whether violation shutdowns are enabled.