Quanta Computer T5016-LB8D - Page 371

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 371/1523
6.8.4.8 Captive Portal local user parameters
This command assigns/modifies the group name for the associated captive portal user. The <user-id>
variable is the user ID, which is a number in the range of 1 to 128. The <group-name> variable is a name
up to 32 characters.
Syntax
user <1-128> group <1-10>
no user <1-128> [group <1-10>]
Default Setting
None
Command Mode
Captive Portal Config
6.8.4.9 Captive Portal user idle timeout
This command sets the session idle timeout value for the associated captive portal user. The <user-id>
variable is the ID of a user configured in the local database, and is a number in the range of 1 to 128.
The <timeout> variable is a number that represents the idle timeout in seconds. Use 0 to indicate that
the timeout is not enforced.
Syntax
user <1-128> idle-timeout <0-900>
no user <1-128> idle-timeout
Default Setting
0
Command Mode
Captive Portal Config