Quanta Computer T5016-LB8D - Page 377

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 377/1523
6.8.4.19 Captive Portal Move users between existing user groups
This command moves existing users from one user group to another. Note that the destination group
must already exist before a move is successful. The <group-id> and <destination-group-id> variables
are each a number in the range of 1-10.
Syntax
user group <1-10> moveusers <destination-group-id>
Default Setting
None
Command Mode
Captive Portal Config
6.8.4.20 Captive Portal user group name
Use this command to configure a group name. The <group-id> variable is a number in the range of 1-10.
The <name> variable can be up to 32 alphanumeric characters.
Syntax
user group <1-10> name <name>
Default Setting
None
Command Mode
Captive Portal Config