Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 387/1523
6.8.4.39 Captive Portal configuration redirect mode redirect URL
Use this command to specify the URL to which the newly authenticated client is redirected if the URL
Redirect Mode is enabled. This command is only available if the redirect mode is enabled.
Default Setting
None
Command Mode
Captive Portal Instance
6.8.4.40 Captive Portal configuration separator color
Use this command to customize the separator bar color of the Captive Portal authentication page using
a wellknown color name or RGB value. For example, red or RGB hex-code; i.e. #FF0000.The range of
<colorcode> is 1-32 characters.
separator-color <color-code>
no separator-color
Default Setting
#BFBFBF
Command Mode
Captive Portal Instance