_____________________________________________________________________________
LB9 User’s Guide 436/1523
6.9.1.3 show cdp neighbors detail
This command displays the CDP neighbor detail information.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Device Id: Identifies the device name in the form of a character string.
Entry Address(es): The L3 addresses of the interface that has sent the update.
Platform: Describes the hardware platform name of the device, for example, Quanta the L2 Network
Switch.
Capability: Describes the device's functional capability in the form of a device type, for example, a
switch.
Local Interface: The CDP neighbor information receiving port.
Port Id: Identifies the port on which the CDP packet is sent.
Holdtime: The length of time a receiving device should hold CDP information before discarding it.
Management Address: The first address of IP address which can use management address
connect to switch.
To Next Page
Loading...