_____________________________________________________________________________
LB9 User’s Guide 459/1523
6.12.1.3 show lldp statistics
This command uses to display the current LLDP traffic and remote table statistics for a specific interface
or for all interfaces.
<slot/port> - Configs a specific interface.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Last Update: Shows the amount of time since the last update to the remote table in days, hours,
minutes, and seconds.
Total Inserts: Total number of inserts to the remote data table.
Total Deletes: Total number of deletes from the remote data table.
Total Drops: Total number of times the complete remote data received was not inserted due to
insufficient resources.
Total Ageouts: Total number of times a complete remote data entry was deleted because the Time
to Live interval expired.
The table contains the following column headings:
Interface: Shows the interface in slot/port format.
Tx Total: Total number of LLDP packets transmitted on the port.
Rx Total: Total number of LLDP packets received on the port.
Discards: Total number of LLDP frames discarded on the port for any reason.
Errors: The number of invalid LLDP frames received on the port.
Ageout: Total number of times a complete remote data entry was deleted for the port because the
Time to Live interval expired.
TLV Discards: Shows the number of TLVs discarded
TLV Unknowns: Total number of LLDP TLVs received on the port where the type value is in the
reserved range, and not recognized.
TLV MED: Total number of LLDP TLVs received on the port where the type value is 127 and OUI
type is 00-12-BB.
TLV 802.1: Total number of LLDP TLVs received on the port where the type value is 127 and OUI
type is 00-80-C2.
To Next Page
Loading...
Need help?
General