EasyManuals Logo

Quanta Computer T5016-LB8D User Manual

Default Icon
1523 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #464 background imageLoading...
Page #464 background image
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 464/1523
Chassis ID: Identifies the chassis of the local device.
Port ID Subtype: Identifies the type of port on the local device.
Port ID: Shows the port number that transmitted the LLDPDU.
System Name: Shows the system name of the local device.
System Description: Describes the local system by identifying the system name and versions of
hardware, operating system, and networking software supported in the device.
Port Description: Describes the port in an alpha-numeric format.
System Capabilities Supported: Indicates the primary function(s) of the device.
System Capabilities Enabled: Shows which of the supported system capabilities are enabled.
Management Address: Lists the type of address and the specific address the local LLDP agent
uses to send and receive information.
MAC/PHY Configuration/Status
Auto-Negetitation: Identifies the auto-negotiation support and current status of the local device.
PMD Auto-Negetitation: The duplex and bit-rate capability of the port of the local device.
Operational MAU Type: Displays the MAU type. The MAU performs physical layer functions,
including digital data conversion from the Ethernet interfaces’ collision detection and bit injection
into the network.
Power Via MDI
MDI Power Support: The MDI power capabilities and status.
PSE Power Pair: Indicates the way of feeding the voltage to the data cable.
Power Class: PoE power class.
Link Aggregation
Aggregation Status: Indicates the link aggregation capabilities and the current aggregation
status.
Aggregation Port Id: Aggregated port identifier.
Maximum Frame Size: Shows the maximum frame size capability of the implemented MAC and
PHY of the remote device.
Port VLAN Identity: Shows the PVID of the connected port of the local device.
VLAN Name: Shows the name of the VLAN which the connected port is in.
Protocol Identity: Shows the particular protocols that are accessible through the port of the local
device.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Quanta Computer T5016-LB8D and is the answer not in the manual?

Quanta Computer T5016-LB8D Specifications

General IconGeneral
BrandQuanta Computer
ModelT5016-LB8D
CategorySwitch
LanguageEnglish