Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 481/1523
6.12.2.15 lldp med transmit-tlv all
The user can go to the CLI Global Configuration Mode to set Type Length Values (TLVs) in the
LLDP-MED, use the lldp med transmit-tlv all [capabilities] [ex-pd] [ex-pse] [inventory][location]
[network-policy]Global configuration command. Use the no lldp med transmit-tlv all [capabilities]
[ex-pd] [ex-pse] [inventory] [location] [network-policy] to remove Type Length Values (TLVs) in the
LLDP-MED
lldp med transmit-tlv all [capabilities] [ex-pd] [ex-pse] [inventory] [location] [network-policy]
no lldp med transmit-tlv all [capabilities] [ex-pd] [ex-pse] [inventory] [location] [network-policy]
capabilities - Transmit the LLDP capabilities TLV.
ex-pd - Transmit the LLDP extended PD TLV.
ex-pse - Transmit the LLDP extended PSE TLV.
inventory - Transmit the LLDP inventory TLV.
location - Transmit the LLDP location TLV.
network-policy - Transmit the LLDP network policy TLV.
Default Setting
None
Command Mode
Global Config
To Next Page
Loading...
Need help?
General