EasyManua.ls Logo

Quanta Computer T5016-LB8D - Page 487

Default Icon
1523 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 487/1523
6.13.2.3 vtp mode
This command uses to set VTP device mode. There are theree modes you can configure, Client,
Server, and Transparent.
Syntax
vtp mode { client | server | transparent }
no vtp mode
<client> - This command set client mode for VTP.
<server> - This command set server mode for VTP.
<transparent> - This command set transparent mode for VTP.
no - This command resets the VTP mode to default value.
Default Setting
Server
Command Mode
Global Config
6.13.2.4 vtp version
Use the no vtp version to reset the VTP version number to default value..
Syntax
vtp version <1-2>
no vtp version
no - This command resets the VTP version to default value.
Default Setting
1
Command Mode
Global Config

Table of Contents