Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 495/1523
6.15.2.2 macfilter addsrc
This command adds the interface to the source filter set for the MAC filter with the MAC address of
<macaddr> and VLAN of <vlan-id>. The <macaddr> parameter must be specified as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The <vlan-id> parameter must identify a valid
VLAN.
macfilter addsrc <macaddr> <vlan-id>
no macfilter addsrc <macaddr> <vlan-id>
<macaddr> - Specified a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
<vlan-id> - VLAN ID. The range of VLAN ID is 1 to 4093.
no - This command removes a port from the source filter set for the MAC filter with the MAC address
of <macaddr> and VLAN of <vlan-id>.
Default Setting
None
Command Mode
Interface Config