Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 506/1523
6.16.1.19 clear port-security dynamic address
This command is used to clear the Dynamic MAC address by using the specified port (interface
<slot/port>) or mac address (address <mac-addr>).
clear port-security dynamic {address <mac-addr> | interface <slot/port> }
<mac-addr> - mac address you want to remove.
<slot/port> - mac address learning on this interface will be removed.
Default Setting
None
Command Mode
Privileged Exec
6.16.1.20 clear ip arp-cache
This command causes all ARP entries of type dynamic to be removed from the ARP cache. If
the gateway keyword is specified, the dynamic entries of type gateway are purged as well. If interface
keyword is specified, he dymanic entries of that interface on the ARP cache Table are purged.
clear ip arp-cache [gateway | interface {<slot/port> | vlan <vlan-id>}]
<slot/port> - Interface number.
<vlan-id> - The VLAN interface number. The range of VLAN ID is 1 to 4093.
Default Setting
None
Command Mode
Privileged Exec
To Next Page
Loading...
Need help?
General