Quanta Computer T5016-LB8D - Page 532

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 532/1523
6.16.18.2 Configuration Command
6.16.18.2.1 capture start
Use this command to manually start capturing CPU packets for packets for trace. The packet capture
operates in three modes: capture file, remote capture and capture line.
This command is not persistent across a reboot cycle.
Syntax
capture start [{all | received | transmit}]
<all> - Specifies all to capture packets for both transmitted and received packets.
<received> - Specifies received to capture only received packets.
<transmit> - Specifies transmit to capture only transmitted packets.
Default Setting
None
Command Mode
Privileged Exec
6.16.18.2.2 capture stop
Use this command to manually stop capturing CPU packets for packets for trace.
Syntax
capture stop
Default Setting
None
Command Mode
Privileged Exec