Quanta Computer T5016-LB8D - Page 538

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 538/1523
6.17.1.2 show ip dhcp snooping binding
This command displays the DHCP Snooping binding entries. To restrict the output, use the following
options:
 Dynamic: Restrict the output based on DCHP snooping.
 Interface: Restrict the output based on a specific interface.
 Static: Restrict the output based on static entries.
 VLAN: Restrict the output based on VLAN.
Syntax
show ip dhcp snooping binding [{static | dynamic}] [interface <slot/port>] [vlan id]
Default Setting
None
Command Mode
Privileged Exec
Display Message
MAC Address: Displays the MAC address for the binding that was added. The MAC address is the
key to the binding database.
IP Address: Displays the valid IP address for the binding rule.
VLAN: The VLAN for the binding rule.
Interface: The interface to add a binding into the DHCP snooping interface.
Type: Binding type; statically configured from the CLI or dynamically learned.
Lease (Secs): he remaining lease time for the entry.