Quanta Computer T5016-LB8D - Page 552

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 552/1523
6.17.2.16 ip dhcp snooping information option remote-id
Use this command to enable the DHCP Snooping information option remote-id on a range of VLANs.
When remote-id string is set using this command, all Client DHCP requests that fall under this service
subscription are added with Option-82 Remote-id as the configured remote-id string.
Use this command with no argument to disable the DHCP Snooping information option remote-id on a
range of VLANs. When remote-id string is reset using this command, the Client DHCP requests that fall
under this service subscription are not added with Option-82 Remote-id.
The remote ID format should be in the form of LLLLXXXXX (LLLL: is the length from remote-id strings)
Syntax
ip dhcp snooping information option remote-id <remoteId string> vlan <vlan-list>
no ip dhcp snooping information option remote-id vlan <vlan-list>
<vlan-list> - Specifies VLAN ID in a list. The range of VLAN ID is 1 to 4093.
no - Clear the DHCP Option-82 remoteId ID for a VLAN..
Default Setting
Disabled
Command Mode
Global Config
6.17.2.17 ip dhcp snooping information option vlan
Use this command to enable the DHCP Snooping information option on a range of VLANs.
Syntax
ip dhcp snooping information option vlan <vlan-list>
no ip dhcp snooping information option vlan <vlan-list>
<vlan-list> - Specifies VLAN ID in a list. The range of VLAN ID is 1 to 4093.
no - This command with no argument to disable the DHCP Snooping information option on a range
of VLANs..
Default Setting
Disabled
Command Mode
Global Config