Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 566/1523
6.19.2.7 arp access-list
This command creates an ARP ACL.
arp access-list <acl-name>
no arp access-list <acl-name>
no - This command deletes a configured ARP ACL.
Default Setting
None
Command Mode
Global Config
6.19.2.8 permit ip host mac host
This command configures a rule for a valid IP address and MAC address combination used in ARP
packet validation.
permit ip host <sender-ip> mac host <sender-mac>
no permit ip host <sender-ip> mac host <sender-mac>
no - This command deletes a rule for a valid IP and MAC combination.
Default Setting
None
Command Mode
ARP Access-list Config