_____________________________________________________________________________
LB9 User’s Guide 574/1523
The combined match criteria of <classname> and <refclassname> must be an allowed combination
based on the class type. Any subsequent changes to the <refclassname> class match criteria must
maintain this validity, or the change attempt shall fail. The total number of class rules formed by the
complete reference class chain (includes both predecessor and successor classes) must not exceed a
platform-specific maximum. In some cases, each removal of a refclass rule reduces the maximum
number of available rules in the class definition by one.
6.20.2.6 no match class-map
This command removes from the specified class definition the set of match conditions defined for
another class.
<refclassname> is the name of an existing DiffServ class whose match conditions
are being referenced by the specified class definition.
To Next Page
Loading...
Need help?
General