Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 591/1523
6.20.3.3 mirror
This command specifies that all incoming packets for the associated traffic stream are copied to a
specific egress interface (physical port or LAG).
This command is not available on the Broadcom 5630x platform.
mirror {<slot/port> | port-channel <portchannel-id>}
<slot/port> - Specifies the physical interface where the mirrored packet send to.
<portchannel-id> - Specifies the port-channel interface where the mirrorred packet send to. The
range of the port-channel ID is 1 to 64.
Default Setting
None
Command Mode
Policy-Class-Map Config
Incompatibilities
Drop, Redirect
6.20.3.4 redirect
This command specifies that all incoming packets for the associated traffic stream are redirected to a
specific egress interface (physical port or port-channel).
redirect {<slot/port> | port-channel <portchannel-id>}
<slot/port> - Specifies which physical interface that traffic stream are redirected to.
<portchannel-id> - Specifies which port-channel interface that traffic stream are directed to. The
range of the port-channel ID is 1 to 64.
Command Mode
Policy-Class-Map Config
Incompatibilities