_____________________________________________________________________________
LB9 User’s Guide 606/1523
6.20.5.3 show diffserv service
This command displays policy service information for the specified interface and direction.
<slot/port> - specifies a valid slot number and port number for the system. The direction parameter
indicates the interface direction of interest.
<portchannel-id> - Specifies the port-channel interface. The range of the port-channel ID is 1 to 64.
Default Setting
None
Command Mode
Privileged Exec
Display Message
DiffServ Admin Mode: The current setting of the DiffServ administrative mode. An attached policy
is only in effect on an interface while DiffServ is in an enabled mode.
Interface: The slot number and port number of the interface (slot/port).
Direction: The traffic direction of this interface service.
Operational Status: The current operational status of this DiffServ service interface.
Policy Name: The name of the policy attached to the interface in the indicated direction.
Policy Details: Attached policy details, whose content is identical to that described for the show
policy-map <policymapname> command (content not repeated here for brevity).
To Next Page
Loading...
Need help?
General