Quanta Computer T5016-LB8D User Manual

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 637/1523
6.23.2.2 queue trust
This command sets the class of service trust mode of an interface. You can set the mode to trust one of
the Dot1p (802.1p) or IP DSCP packet markings. You can also set the interface mode to untrusted. If
you configure an interface to use Dot1p, the mode does not appear in the output of the show running
config command because Dot1p is the default.
Syntax
queue trust {dot1p | ip-dscp | untrusted } all
no queue trust all
no - This command sets the class of service trust mode to untrusted for all interfaces.
Default Setting
dot1p
Command Mode
Global Config.
Syntax
queue trust {dot1p | ip-dscp | untrusted }
no queue trust
no - This command sets the class of service trust mode to untrusted for all interfaces.
Default Setting
dot1p
Command Mode
Interface Config.

Quanta Computer T5016-LB8D Specifications

General

Brand	Quanta Computer
Model	T5016-LB8D
Category	Switch
Language	English