Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 640/1523
6.23.2.5 queue cos-queue traffic-shape
This command specifies the maximum transmission bandwidth limit for the interface as a whole. Also
known as rate shaping, this has the effect of smoothing temporary traffic bursts over time so that the
transmitted traffic rate is bounded.
queue cos-queue traffic-shape <bw>
no queue cos-queue traffic-shape
<bw> - Valid range is (0 to 100) in increments 1.
no - This command restores the default shaping rate value.
Default Setting
None
Command Mode
Interface Config.
This command specifies the maximum transmission bandwidth limit for all interfaces. Also known as rate
shaping, this has the effect of smoothing temporary traffic bursts over time so that the transmitted traffic
rate is bounded.
queue cos-queue traffic-shape all <bw>
no queue cos-queue traffic-shape all
<bw> - Valid range is (0 to 100) in increments 1.
no - This command restores the default shaping rate value for all interfaces.
Default Setting
None
Command Mode
Global Config.
To Next Page
Loading...
Need help?
General