_____________________________________________________________________________
LB9 User’s Guide 673/1523
Type: Is the type that was configured into the unit. The possible values are Local, Gateway,
Dynamic and Static.
Age: This field displays the current age of the ARP entry since last refresh (in hh:mm:ss format).
7.1.1.2 show ip arp brief
This command displays the brief Address Resolution Protocol (ARP) table information.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Age Time: Is the time it takes for an ARP entry to age out. This value was configured into the unit.
Age time is measured in seconds.
Response Time: Is the time it takes for an ARP request timeout. This value was configured into the
unit. Response time is measured in seconds.
Retries: Is the maximum number of times an ARP request is retried. This value was configured into
the unit.
Cache Size: Is the maximum number of entries in the ARP table. This value was configured into the
unit.
Dynamic renew mode: Displays whether the ARP component automatically attempts to renew
dynamic ARP entries when they aged out.
Total Entry Count Current/Peak: Field listing the total entries in the ARP table and the peak entry
count in the ARP table.
Static Entry Count Configured/Active/Max: Field listing the configured static entry count, active
static entry count, and maximum static entry count in the ARP table.
To Next Page
Loading...
Need help?
General