_____________________________________________________________________________
LB9 User’s Guide 682/1523
Destination Unreachables: Displays whether ICMP Destination Unreachables may be sent
(enabled or disabled).
ICMP Redirects: Displays whether ICMP Redirects may be sent (enabled or disabled).
7.2.1.3 show ip interface brief
This command displays summary information about IP configuration settings for all ports in the router.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Interface: Valid slot, and port number separated by forward slashes or VLAN routing interface.
State: Indicate the operational state of the routing interface.
IP Address: The IP address of the routing interface.
IP Mask: The IP mask of the routing interface.
Method: Is the way to get the IP Address. The possible value is “Manual”, “DHCP” or “None”.Netdir
Bcast: Indicates if IP forwards net-directed broadcasts on this interface. Possible values are Enable
or Disable.
MultiCast Fwd: Indicates the multicast forwarding administrative mode on the interface. Possible
values are Enable or Disable.
To Next Page
Loading...
Need help?
General