Quanta Computer T5016-LB8D User Manual

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 70/1523
This command is used to set the speed and duplex mode for all interfaces.
Syntax
speed-duplex all 1000
no speed-duplex all 1000
1000 – 1000 Mbps, only valid for 10G ports.
all - This command represents all interfaces.
no - This command will be back to 10G speed from 1G speed for all 10G ports.
Default Setting
None
Command Mode
Global Config
6.2.1.6 negotiate
This command enables automatic negotiation on a port. The default value is enabled.
i
The 10-Giga and 40-Giga interfaces do not provide the following command.
Syntax
negotiate
no negotiate
no - This command disables automatic negotiation on a port.
Default Setting
Disable
Command Mode
Interface Config

Quanta Computer T5016-LB8D Specifications

General

Brand	Quanta Computer
Model	T5016-LB8D
Category	Switch
Language	English