_____________________________________________________________________________
LB9 User’s Guide 711/1523
ï‚· Full - the neighboring routers are fully adjacent and they will now appear in router-LSAs and
network-LSAs.
Dead Time: The amount of time, in seconds, to wait before the router assumes the neighbor is
unreachable.
If you specify an IP address for the neighbor router, the following fields display:
Interface: Valid slot and port number separated by a forward slash.
Neighbor IP Address: The IP address of the neighbor router.
Interface Index: The interface ID of the neighbor router.
Area ID: The area ID of the OSPF area associated with the interface.
Options: An integer value that indicates the optional OSPF capabilities supported by the neighbor.
The neighbor's optional OSPF capabilities are also listed in its Hello packets. This enables received
Hello Packets to be rejected (i.e., neighbor relationships will not even start to form) if there is a
mismatch in certain crucial OSPF capabilities.
Router Priority: The OSPF priority for the specified interface. The priority of an interface is a priority
integer from 0 to 255. A value of '0' indicates that the router is not eligible to become the designated
router on this network.
Dead Timer Due: The amount of time, in seconds, to wait before the router assumes the neighbor is
unreachable.
Up Time: Neighbor uptime; how long since the adjacency last reached the Full state.
State: The state of the neighboring routers.
Events: The number of times this neighbor relationship has changed state, or an error has occurred.
Retransmission Queue Length: An integer representing the current length of the retransmission
queue of the specified neighbor router Id of the specified interface.
To Next Page
Loading...
Need help?
General