Quanta Computer T5016-LB8D - Page 724

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 724/1523
7.3.2.15 area stub no-summary
area stub no-summary command configures the Summary LSA mode for the stub area identified by
<areaid>. Use this command to prevent LSA Summaries from being sent. no area stub no-summary
command configures the default Summary LSA mode for the stub area identified by <areaid>.
Syntax
area <areaid> stub no-summary
no area <areaid> stub no-summary
Default Setting
Disabled
Command Mode
Router OSPF Config Mode
7.3.2.16 area virtual-link
area virtual-link command creates the OSPF virtual interface for the specified <areaid> and
<neighbor>. The <neighbor> parameter is the Router ID of the neighbor. no area virtual-link command
deletes the OSPF virtual interface from the given interface, identified by <areaid> and <neighbor>. The
<neighbor> parameter is the Router ID of the neighbor.
Syntax
area <areaid> virtual-link <neighbor>
no area <areaid> virtual-link <neighbor>
Default Setting
None
Command Mode
Router OSPF Config Mode