Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 745/1523
7.4.2.3 bootpdhcprelay maxhopcount
This command configures the maximum allowable relay agent hops for BootP/DHCP Relay on the
system.
bootpdhcprelay maxhopcount <hops>
no bootpdhcprelay maxhopcount
<hops> - The range of maximum hop count is 1 to 16.
no - Set the maximum hop count to 4.
Default Setting
The default value is 4.
Command Mode
Global Config
7.4.2.4 bootpdhcprelay minwaittime
This command configures the minimum wait time in seconds for BootP/DHCP Relay on the system.
When the BOOTP relay agent receives a BOOTREQUEST message, it may use the
seconds-since-client-began-booting field of the request as a factor in deciding whether to relay the
request or not.
bootpdhcprelay minwaittime <minwaittime>
no bootpdhcprelay minwaittime
<minwaittime> - The range of minimum wait time is 0 to 100.
no - Set the minimum wait time to 0 seconds.
Default Setting
The default value is 0.
Command Mode
Global Config
To Next Page
Loading...
Need help?
General