_____________________________________________________________________________
LB9 User’s Guide 772/1523
7.9.1.4 show ip vrrp interface stats
This command displays the statistical information about each virtual router configured on the switch.
<slot/port> - Valid slot and port number separated by forward slashes.
<vrid> - Virtual router ID.
<vlan-id> - VLAN ID. The range of VLAN ID is 1 to 4093.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
VRID: Represents the router ID of the virtual router.
Uptime: Is the time that the virtual router has been up, in days, hours, minutes and seconds.
Protocol: Represents the protocol configured on the interface.
State Transitioned to Master: Represents the total number of times virtual router state has
changed to MASTER.
Advertisement Received: Represents the total number of VRRP advertisements received by this
virtual router.
Advertisement Interval Errors: Represents the total number of VRRP advertisements received for
which advertisement interval is different than the configured value for this virtual
router.
Authentication Failure: Represents the total number of VRRP packets received that don't pass the
authentication check.
IP TTL errors: Represents the total number of VRRP packets received by the virtual router with IP
TTL (time to live) not equal to 255.
Zero Priority Packets Received: Represents the total number of VRRP packets received by virtual
router with a priority of '0'.
Zero Priority Packets Sent: Represents the total number of VRRP packets sent by the virtual router
with a priority of '0'
Invalid Type Packets Received: Represents the total number of VRRP packets received by the
virtual router with invalid 'type' field.
Address List Errors: Represents the total number of VRRP packets received for which address list
does not match the locally configured list for the virtual router.
To Next Page
Loading...
Need help?
General