_____________________________________________________________________________
LB9 User’s Guide 787/1523
8.1.1.6 show ip dvmrp route
This command displays the multicast routing information for DVMRP.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Source Address: This field displays the multicast address of the source group.
Source Mask: This field displays the IP Mask for the source group.
Upstream Neighbor: This field indicates the IP Address of the neighbor which is the source for the
packets for a specified multicast address.
Interface: This field displays the interface used to receive the packets sent by the sources.
Metric: This field displays the distance in hops to the source subnet. This field has a different
meaning than the Interface Metric field.
Expiry Time(secs): This field indicates the expiry time in seconds. This is the time remaining for this
route to age out.
Up Time(secs): This field indicates the time when a specified route was learnt, in seconds.
To Next Page
Loading...
Need help?
General