Quanta Computer T5016-LB8D - Page 837

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 837/1523
8.6.1.7 show ipv6 pim rp mapping
Use this command to display all active group-to-RP mappings of which the router is a aware (either
configured or learned from the bootstrap router (BSR)). Use the optional parameters to limit the display
to a specific RPaddress or to view group-to-candidate RP or group to Static RP mapping information.
Syntax
show ipv6 pim rp mapping [{rp-address | candidate | static}]
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
RP Address: The IPv6 address of the RP for the group specified.
Group Address: The IPv6 address and prefix length of the multicast group.
Origin: Indicates the mechanism (BSR or static) by which the RP was selected.
Expiry Time: The expiry time of the RP mapping.