Quanta Computer T5016-LB8D - Page 839

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 839/1523
8.6.2.3 ipv6 pim
This command administratively enables PIM on an interface or range of interfaces.
Syntax
ipv6 pim
no ipv6 pim
no - This command sets the administrative mode of PIM on an interface to disabled.
Default Setting
Disbaled
Command Mode
Interface Config
8.6.2.4 ipv6 pim hello-interval
Use this command to configure the PIM hello interval for the specified router interface or range of
interfaces. The hello-interval is specified in seconds and is in the range 0–18000.
Syntax
ipv6 pim hello-interval <0–18000>
no ipv6 pim hello-interval
no - Use this command to set the PIM hello interval to the default value.
Default Setting
30
Command Mode
Interface Config