_____________________________________________________________________________
LB9 User’s Guide 847/1523
8.7.1.2 show ip igmp-proxy groups
This command displays information about the subscribed multicast groups that IGMP Proxy
reported. It displays a table of entries with the following as the fields of each column.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Interface: The interface number of the IGMP Proxy.
Group Address: The IP address of the multicast group.
Last Reporter: The IP address of host that last sent a membership report.
Up Time (in secs): The time elapsed since last created.
Member State: The status of the entry. Possible values are IDLE_MEMBER or DELAY_MEMBER.
ï‚· IDLE_MEMBER - interface has responded to the latest group membership query for this
group.
ï‚· DELAY_MEMBER - interface is going to send a group membership report to respond to a
group membership query for this group.
Filter Mode: Possible values are Include or Exclude.
Sources: The number of sources attached to the multicast group.
To Next Page
Loading...
Need help?
General