_____________________________________________________________________________
LB9 User’s Guide 855/1523
8.8.1.4 show ipv6 mld-proxy interface
This command displays a detailed list of the host interface status parameters. It displays the following
parameters only when you enable MLD-Proxy.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Interface Index: Shows the slot/port of the MLD-proxy.
The column headings of the table associated with the interface are as follows:
Ver: Shows the MLD version.
Query Rcvd: Number of MLD queries received.
Report Rcvd: Number of MLD reports received.
Report Sent: Number of MLD reports sent.
Leaves Rcvd: Number of MLD leaves received. Valid for version 2 only.
Leaves Sent: Number of MLD leaves sent on the Proxy interface. Valid for version 2 only.