Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 89/1523
6.2.3.4 show vlan association subnet
This command displays the VLAN associated with a specific configured IP-Address and net mask. If no
IP Address and net mask are specified, the VLAN associations of all the configured IP-subnets are
displayed.
show vlan association subnet [<ipaddr> <netmask>]
<ipaddr> - The IP address.
<netmask> - The subnet mask.
Default Setting
None
Command Mode
Privileged Exec
Display Message
IP Subnet: The IP address assigned to each interface.
IP Mask: The subnet mask.
VLAN ID: There is a VLAN Identifier (VID) associated with each VLAN. The range of the VLAN ID is
1 to 4093.
Priority: There is a priority for each IPsubnet-based.
To Next Page
Loading...
Need help?
General