Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 923/1523
9.4.2.25 area virtual-link retransmit-interval
This command configures the retransmit interval for the OSPF virtual interface on the interface identified
by <areaid> and <neighborid>.
area <areaid> virtual-link <neighborid> retransmit-interval <0-3600>
no area <areaid> virtual-link <neighborid> retransmit-interval
<areaid> - Area ID.
<neighborid> - Router ID of the neighbor.
<0-3600> - The range of the retransmit interval is 0 to 3600.
no - This command configures the default retransmit interval for the OSPF virtual interface on the
interface identified b
y <areaid> a
nd <neighborid
>.
Default Setting
5 seconds.
Command Mode
Router OSPFv3 Config
To Next Page
Loading...
Need help?
General