Quanta Computer T5016-LB8D User Manual

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 981/1523
10.7.2.7 exit
This command returns the switch to Global Configuration mode and enables the VM Tracer session.
Changes to the VM Tracer session that were made in vmtracer mode are stored when the mode is
exited.
Syntax
exit
Default Setting
none
Command Mode
VM Tracer Config
10.7.2.8 vmtracer
The command enables vmtracer mode on the configuration mode interface. Interfaces with vmtracer
mode enabled send discovery packets to the connected host device.
The no vmtracer command disables vmtracer mode on the configuration mode interface.
Syntax
vmtracer
no vmtracer
no - This command disables VM Tracer mode on the configuration mode interface
Default Setting
disable
Command Mode
Interface Config

Quanta Computer T5016-LB8D Specifications

General

Brand	Quanta Computer
Model	T5016-LB8D
Category	Switch
Language	English