_____________________________________________________________________________
LB9 User’s Guide 983/1523
2. Switching Menu: This section provides users to configure switch interface (port), DHCP Snooping,
VLAN, Protected Ports, Protocol-Based VLAN, IP Subnet-based VLAN, MAC-based VLAN,
MAC-Based Voice VLAN, Voice VLAN, Filters, GARP, Dynamic Arp Inspection, IGMP Snooping,
IGMP Snooping Querier, MLD Snooping, MLD Snooping Querier, Port Channel, Multicast
Forwarding Database, Spanning Tree, MLAG, VTP, Link State, and Port Backup.
3. Security Menu: This section provides users to configure switch securities including Port Access
Control, Port Security, Captive-portal, RADIUS, TACACS+, LDAP, Access Control Lists, IP Filter,
Secure HTTP, Secure Shell and Denial of Service.
4. QOS Menu: This section provides users to configure Differentiated Service, DiffServ Wizard, Class
of Service, Auto VoIP and iSCSI optimization.
5. Routing Menu: This section provides users to configure ARP, IP, OSPF, BOOTP/DHCP Relay
Agent, RIP, Router Discovery, Router, VLAN Routing, VRRP, Tunnels and Loopbacks.
6. IPv6 Menu: This section provides users to configure OSPFv3, RIPv6, and IPv6 Routing Interface.
7. IPv4 Multicast Menu: This section provides users to configure IGMP, DVMRP, Multicast, PIM-DM,
PIM-SM. It also provides information for a multicast distribution tree.
8. IPv6 Multicast Menu: This section provides users to configure MLD, PIM-DM, PIM-SM. It also
provides information for a multicast distribution tree.
9. Data Center Menu: This section provides users to configure Congestion notification, Data Center
Bridging Exchange, PFC, ETS ,FIP snooping, EVB and VM Tracer.
To Next Page
Loading...
Need help?
General