_____________________________________________________________________________
LB9 User’s Guide 993/1523
Default Gateway - The default gateway for the IP interface. The factory default value is 0.0.0.0
IPv6 Configurable Data
New IPv6 Address - To configure the field, select Add from the "Add/Delete IPv6 Addresses" drop
down menu
EUI Flag -To set the EUI flag while configuring "New IPv6 Address" select True from the drop down
menu. Default is False.
IPv6 Address to Delete - To configure the field to delete IPv6 address, select Delete from the
"Add/Delete IPv6 Addresses" drop down menu.
IPv6 Gateway - The default gateway for the IPv6 interface. The factory default value is None
IPv4 Non-Configurable Data
Burned-in MAC Address - The burned-in MAC address used for in-band connectivity.
IPv6 Non-Configurable Data
DHCPv6 Client DUID -Displays the Client Identifier used by DHCPv6 Client when sending
messages to the DHCPv6 Server. This entry is visible to user only if IPv6 Service Port Configuration
Protocol is set to DHCP
IPv6 Addresses -List of configured IPv6 addresses.
Default IPv6 Gateway Address -Default IPv6 Gateway addresses
IPv6 Link-local scope ID - Service Port's IPv6 Link-local address scope ID.
Command Buttons
Submit - Update the switch with the values on the screen. If you want the switch to retain the new
values across a power cycle you must perform a save
To Next Page
Loading...
Need help?
General