R&S ESR Series

Remote Control
R&S
®
ESR
735User Manual 1175.7068.02 ─ 12
Manual operation: See "Weighting Filter" on page 240
[SENSe:]POWer:ACHannel:FILTer:ALPHa:CHANnel<channel> <Alpha>
This command defines the roll-off factor for the weighting filter of the specified TX
channel.
Suffix:
<channel>
.
1...11
the TX channel
Parameters:
<Alpha> <numeric value>
*RST: 0,22
Example:
POW:ACH:FILT:ALPH:CHAN3 0,35
Sets the alpha value for the weighting filter for the TX channel 3
to 0,35.
Manual operation: See "Weighting Filter" on page 240
[SENSe:]POWer:ACHannel:FILTer[:STATe]:ACHannel <State>
This command activates the weighting filter for the adjacent channel.
Parameters:
<State> ON | OFF
*RST: OFF
Example:
POW:ACH:FILT:ACH ON
Manual operation: See "Weighting Filter" on page 240
[SENSe:]POWer:ACHannel:FILTer[:STATe]:ALTernate<channel> <State>
This command activates the weighting filter for the specified alternate channel.
Suffix:
<channel>
.
1...11
the alternate adjacent channel
Parameters:
<State> ON | OFF
*RST: OFF
Example:
POW:ACH:FILT:ALT3 ON
Activates the weighting filter for alternate channel 3.
Manual operation: See "Weighting Filter" on page 240
[SENSe:]POWer:ACHannel:FILTer[:STATe]:CHANnel<channel> <State>
This command activates the weighting filter for the specified TX channel.
Remote Commands in Spectrum Analyzer Mode