6. Summary
The following table shows the number of transfer belt rotations needed per
copy for each of the various modes described above (except for OHP/thick
paper mode). It does not include the belt rotations that take place during
toner replenishment and other procedures. This explains why copying speed
depends on the selected mode and copy paper size.
1C - Continuous transfer to the belt (no synchronization of toner images on
the belt is needed)
2C
Preliminary
1st
Color
Revolver
Positioning
2nd
Color
Between
Pages
R,B < A4 Paper 1 1 – 1 1
R,B > A4 Paper 1 1 1 1 1
G < A4 Paper 1 1 1 1 1
G >A4 Paper 1 1 2 1 1
4C
Preliminary
1st
Color
Revolver
Positioning
2nd
Color
Revolver
Positioning
< A4 Paper 1 1 – 1 –
> A4 Paper 1 1 1 1 1
3rd
Color
Revolver
Positioning
4th
Color
Between
Pages
< A4 Paper 1 – 1 1
> A4 Paper 1 1 1 1
TRANSFER BELT UNIT
A166/A187/A189 2-100 SM
To Next Page
