1. SERVICE CALL CONDITIONS
This copier provides the following five types of service call (SC) conditions
that help minimize the possibility of system down time.
TYPE 1: Safety Action Immediately stops the copier and displays an SC. Turning
the power off and on cannot recover the copier.
TYPE 2: Immediate Stop Immediately stops the copier and displays an SC. Turning
the power off and on can recover the copier.
TYPE 3: Stop Displays an SC after any necessary machine operation is
completed. Turning the power off and on can recover the
copier.
TYPE 4: Unit Failure Displays an SC only when a faulty function is selected.
Turning the power off and on can recover the copier.
TYPE 5: Logging Only Neither displays an SC nor stops the copier. Only logs these
SCs. Logged SCs can be displayed in the SP mode.
Type 1 SCs (Safety Action) can be reset by taking the following action:
• SCs for fusing unit failure:
Enter SP5-810-1 (Fusing SC Reset), select "1" (Reset), and turn the
power off and on.
• Other Type 1 SCs:
Enter SP5-810-2 (SC Reset), select "1" (Reset), and turn the power off
and on.
All SCs are logged.
Trouble-
shooting
SERVICE CALL CONDITIONS
SM 6-1 A166/A187/A189
To Next Page
Loading...
