1.2.3 Power Requirements
WARNING
1. Install the machine as close to the outlet as possible. Firmly plug
in the machine after installation.
2. Avoid multi-wiring.
3. The power cord should be placed where it cannot be stepped on or
flattened by the machine. When installing the machine, route the
power cord out of the way of general traffic.
4. Be sure to connect the the power cord’s grounding wire.
1. Input voltage level:
120 V, 60 Hz: More than 15 A
220 V to 240 V, 50/60 Hz: More than 10 A
Note:
{
Standard 15 Amp service is sufficient.
|
A quality A.C. line filter/surge suppresser is recommended
2. Permissible voltage fluctuation: ±10%
3. Do not set anything on the power cord.
Installation
Procedure
INSTALLATION REQUIREMENTS
SM 3-5 A166/A187/A189
To Next Page
Loading...
