Ricoh A66 - Setting up the SP Modes for the Key Counter

9.1.2 Setting up the SP Modes for the Key Counter
SP5-113: Key Card/Coin Lock (Key Card /Key Counter/Coin Lock
Selection)
This mode can be used to select the key counter mode.
0: None (Default), 1: Key card, 2: Key counter, 3: Coin Lock
NOTE: After installing the key counter, this SP mode must be changed to 2.
SP5-104: Double Counting
A3\8
1/2
" x 11" double counting can be selected with this mode, depending on
customer contract.
0: Yes, 1: No (default)
SP5-120: Clear Modes On/Off (Key Counter)
Clear modes when the key counter is removed
This mode can specify whether the machine clears the current mode when
the key counter is removed.
0: Yes (default), 1: No
NOTE: The count-up timing for the key counter occurs when paper is fed in.
OTHERS
A166/A187/A189 3-62 SM